Automatic Technology GDO-9 Manuel d'installation télécharger pdf (Page 25)

POWER SUPPLY 230V - 240V AC 50Hz

TRANSFORMER RATING........................................................24V DC

STANDBY POWER ....................................................................2.2 Watts

MOTOR POWER........................................................................100 Watts

MOTOR TYPE.............................................................................24V DC Permanent Magnet

SHUTTLE TRAVEL DISTANCE IN THE C RAIL...........................2.8 M APROX ( STANDARD)

MAXIMUM SHUTTLE TRAVEL DISTANCE IN THE C RAIL.....5 M( WITH EXTENDED C RAIL)

MAXIMUM DOOR OPENING: WIDTH.............................5500mm (16.5 SQ M )

HEIGHT..........................3000mm

WEIGHT...........................100 Kg

SHORT TERM PEAK FORCE....................................................800 N (80Kg)

LIFT FORCE................................................................................500 N (50Kg)

NOMINAL FORCE.......................................................................150 N ( 15 KG )

RECEIVER TYPE.........................................................................UHF 433.92 MHz. AM Receiver

RECEIVER CODE STORAGE CAPACITY.............................24 x 4 Button Transmitter Codes

TRANSMITTER FREQUENCY.................................................433.92 MHz

CODING TYPE..............................................................................Code Hopping

NUMBER OF CODE COMBINATIONS....................................Over 4.29 Billion Random Codes

CODE GENERATION..................................................................Non-linear Encryption Algorithm

PTX-4 TRANSMITTER BATTERY............................................A23 Alkaline 12 Volts

EAT-1 TRANSMITTER BATTERY:...........................................CR1220 Lithium 3 Volts

COURTESY LIGHT......................................................................LED ( Light emitting diodes )

CONTROLLER FUSE..................................................................10A Slow Blow

DEFAULT SETTINGS AND SPECIFICATIONS

Note:

Intermittent operations may occur in areas which experience very strong winds. The strong wind puts extra pressure on the door

and tracks which may in turn trigger the safety obstruction detection system intermittently.

DEFAULT STEP MAXIMUM

MAXIMUM MOTOR RUN TIME 25 Secs. — —

COURTESY LIGHT TIME 3 Mins. 10 Secs. 4 Mins.

OBSTRUCTION FORCE MARGIN 8 1 20

AUTO CLOSE TIME 0 Secs. 1 Sec. 4 Mins.

FACTORY DEFAULT SETTINGS

TECHNICAL SPECIFICATIONS

1 2 ... 20 21 22 23 24 25 26 27 28

Pas de commentaire

Automatic Technology GDO-9 Manuel d'installation Page 25